|
|
Props and Accessories
Prop Bottle
Prop bottles are easy to make and look so cute next to your reborn!
You'll need:
- Store bought baby bottle
- Acid free silicone sealer (look in the scrapbooking section of your craft store)
- White fabric softener
- Yellow food coloring
- E6000 glue
- Old chop stick or orange stick
Start by gluing the rubber nipple into the bottle cap with E6000. Remove any glue leaks with a toothpick.
Next
we need to plug the nipple of our bottle so it won't leak. If
your silicone comes with a fine tip, use that for this step. Mine
didn't, so I had to use a Q-tip and try to make my application as
smooth as possible.
Let the silicone cure for at least 24 hours.
Now
we need to fill our bottle with "milk." Fill your bottle as full
as you desire with the white fabric softener. Because formula
isn't completely white, I usually add a tiny amount of yellow food coloring and mix completely.
Put
more E6000 glue on the threads of the bottle cap to keep the lid from
coming off. Screw the cap on, remove any excess glue with a toothpick,
and allow to dry completely. Check to make sure the contents of
the bottle don't leak, and you're done!
|
|
|
|
|
|
|
|
|
